Hot Water Systems Perth WA

Another extremely energy efficient and eco-friendly hot water heating system is a heat pump. A heat pump does not require the sun to heat the water as a solar powered system would, instead heat pumps draw energy from the ambient outside air, extract the heat and transfer it to a storage tank heating the water inside. This advanced technology works much the same as a refrigerator or a reverse cycle air conditioner but in reverse. This system is especially effective if you wish to ‘go green’ but are unable to install solar panels on your roof. Heat pumps are classed in the same category as solar powered systems in regards to the generous government rebates available.
Natural gas hot water heaters will also reduce your carbon footprint and save you money compared to an electric unit, they will also provide you with a continuous strong flow of instantaneous hot water

Did you turn on your shower this morning expecting to be covered in steaming hot water, but found that only cold water came out? Our perform electric hot water repairs quickly and sahot-water-system-4fely to get your hot water back as soon as possible for all brands of electric hot water systems.

Whether you require a hot water heater repair, replacement or a new supply and installation – we are the experts for the job. We are proficient in all makes and models of solar powered, heat pump, gas or electric hot water systems and will have your home with hot water before you even have time to worry about it.

Utilizing solar power is an extremely cost effective and environmentally friendly way of heating your hot water. Although they can sometimes be expensive to install they will save you money in the long run and many governments will offer exceptional rebates when you are converting from a less energy efficient model.

The Basics of Solar Hot Water Systems


Solar hot water systems have been gaining popularity as the world continues to move in a greener direction, with more eco-friendly energy ideas gaining momentum and becoming more commonly used. Using solar energy to heat up water is not necessarily a new concept, but the process has certainly been refined greatly, and there are many different potential applications as well as benefits to using this kind of technology.

The way this kind of solar system works is that you have a collector to gather sunlight and heat. The heat is transferred, typically through piping and via a fluid, towards a tank of water to be heated. Before this happens, you might find advanced systems that focus the sunlight onto the tube for heating. There are also two different broad categories of solar hot water systems, direct and passive, depending on how the heat and fluids are transferred and moved abut.

Many individuals hear the term solar and immediately think of electricity. However, a hot water system like this never directly produces electricity. The energy from the sun is instead directly used for heat. However, one of the popular applications for solar hot water is then to use that to make the electricity. These systems can be very large in scale and are effective, however there are still some concerns about the efficiency of these two piece process.

There are industrial, commercial and residential applications for using solar energy to heat up water. Residentially, this kind of system is often used to heat up pools, or used to regulate the temperature in an air conditioning and heating system. As mentioned, the process can be used industrially to produce electricity, and it can be applied in many different ways for businesses of various kinds.

The benefits to using solar hot water systems like this for hot water is that you are taking a big step towards reducing your impact on the environment and the footprint that you leave behind. Particularly with a passive system, you can entirely forgo the use of electricity to heat up water, which means you are less reliant on the grid, and are contributing far less in terms of pollution and worldwide energy usage.

Plus, although you have to pay for an initial system and the installation of that, over time you will actually be saving money. Hot water accounts for up to 25% of residential heating bills for many homeowners, and being able to cut into that by delivering some hot water via a system like this can add up to big savings over the years.

Hopefully by now you have a bit of a better idea about solar water systems and what they are all about. They are used to directly capture sunlight and heat from the sun, and use it to heat up water for various residential or industrial applications. While no electricity is produced, the process can be the first piece of a system that is used to produce solar electricity. Using a system like this within a home is a great way to cut back on environmental impact and lower energy bills.

Are Solar Hot Water Systems in Perth Of Any Importance

When it comes to having hot water in your home and save on the electrical bill at the same time, solar hot water systems are probably the very best option. Why? These systems can be used in any climate, and sunshine is free. Plus, they are easily installed and maintained. The only real effort you have to make is to choose the model that best answers your needs, considering the climate of the region you live in.

Solar hot water systems Perth can be divided into two categories: active, and passive. The first, or passive solar water heating system, is usually less expensive, but it is also less efficient. The advantage to the passive category lies on the fact that these systems are more reliable and may have a longer life.

hot-water-systems-perthIf your home is in an area where the outside temperatures never reach freezing levels, a direct heating system can be used. This system takes the actual water that will be used in your home and circulates it through the solar webbing, heating it and returning it to your home to be used, or stored for later use. It is the most efficient type of solar heating system and also the least expensive to implement.

On the other hand, if your home is located in a region that experiences freezing temperatures, an indirect heating unit will be the best option. This system operates much the same way as the direct heating unit but circulates a liquid through the webbing that won’t freeze when the temperature drops. The liquid is then sent through pipes to a holding tank that transfers their heat to your home’s water. It never enters into direct contact with the water, and the heat is only transferred through conduction alone. Despite being slightly less efficient and a little more expensive, it still does an excellent job of heating the water for your home cost-efficiently.

With either of these systems, it is still a good idea to have a small conventional water heater to use as a backup for the times your family requires a larger quantity o hot water, and also for the cloudy days if your home is in a northern area.

The Benefits Of Instant Hot Water Systems

Plumber Baulkham Hills Hot Water Repairs

In many ways, our lives have been made much easier through the introduction of instant hot water systems. These are connected to the taps in our homes (such as those in the kitchen, bathroom and laundry), allowing us to have access to hot or even warm water whenever we need it. Apart from the fact these systems are instantaneous, do they offer our homes and businesses any other benefits? There are three different types of instant systems currently on the market, each with its own advantages and benefits.


This is the most commonly used of the three types of system currently on the market. You will need a plumber to install this type in your home, as it is connected to your mains water supply. The tank will heat the water and send it to the hot faucet when you turn it on. It also comes fully equipped with a number of useful features, including a filter and an adjustable thermostat. The great thing about this system is that you will never need to fill it and it is able to produce heated water in large volumes.


This is an instant system that is slowly growing in popularity; because it doesn’t utilize a tank at all, it is very light and portable. This option is perfect for homes that don’t have a whole lot of space, as they are much smaller than their storage counterparts. Many homeowners prefer this type because it doesn’t require a plumber for installation and it doesn’t use a whole lot of electricity, as it only heats water when required. Whilst it is an environmentally friendly option, you will need to refill it.

Heat Pump

This is the third type of system and is the newest on the market. Similarly to the tankless type, it doesn’t store water that is has heated and it doesn’t require a plumber for installation. The system is operated by either a built-in electric pump or a manual push down pump. It will heat water, much like you would do in a pot or kettle, before sending it to the hot faucet. Whilst it does feature an adjustable thermostat, you will need to refill it, as it possesses a maximum capacity of only 5 litres.

The main benefit associated with all three of the above instant systems is that they basically negate the need for a kettle, as you will be able to use the hot water provided for a number of cooking needs (such as tea, coffee, hot chocolate, baby formula and even 2 minute noodles). This will improve the speed of preparing beverages and food, as well as helping to avoid the hazards associated with using a kettle. Notably, these include causing serious scalds from spills or touching the surface and burns to countertops.

If you are interested in a brand new instant hot water system for your home, we hope that the above information has provided you with an understanding of all the benefits that you will be afforded from making this decision. We also hope that we have provided you with everything that you need to know about each of the various systems on the market, allowing you to choose the one that will best suit your home. Good luck in your search for an endless supply of hot water and happy bathing and cooking!